Advanced Search
Search Results
30 total results found
[DOC] Documentation
Information on how MeshCore works under the hood and details on the various components and configuration items.
[DOC] Overview
What is MeshCore? MeshCore is a decentralised text-based communications platform. It is designed to run on commodity, affordable development boards (nRF52840, ESP32, RP2040) and uses LoRa radios to create a meshed network. MeshCore works well over long dist...
[HTG] How-To Guides
Step-by-step instructions on how to do perform common tasks in MeshCore.
[DOC] Firmware
[ENT] Entnet
Even more unofficial "standards" used by the Entnet-owned nodes. These are not rules, you don't have to follow them, but here they are in case you're interested.
[ENT] Node Names
Meshcore Node Naming Guide This guide outlines the standardised naming convention for MeshCore infrastructure nodes (Repeaters only). It ensures consistency, readability, and compatibility within a 23-character limit. Naming Format Repeaters Naming Layo...
[DOC] Getting Started
New to MeshCore? This section aims to break down the fundamental concepts that will help you get started.
[DOC] Companion Firmware
[ENT] Naming
[DOC] Ripple Firmware
[DOC] Boards
Compare features and attributes of the various boards supported by MeshCore.
[DOC] Room Server Firmware
[DOC] MCU Hardware Comparison
Development Boards Feature Heltec v4 (Low Power) Heltec v4 (High Power) LilyGO T3-S3 SX1262 Seeed XIAO + Wio-SX1262 RAK WisBlock (RAK4631 + Base) MCU ESP32-S3R2 (240 MHz dual-core, Wi-Fi/BLE) ESP32-S3R2 (240 MHz dual-core, Wi-Fi/BLE) ES...
[HTG] Initial Setup
New to MeshCore? Start here! This section has the basics, such as how to flash your nodes.
[DOC] ISM Band Usage
[DOC] Frequency Allocation
[HTG] Ripple Firmware Device Setup
Setting up your device after flashing the Ripple GUI firmware (e.g. Lilygo T-Deck).
[HTG] DFU Recovery Bootloader (nRF52840 Only)
Summary In the event of a failed firmware flash or failed boot post-flash, nRF52840-based devices may fall back into UF2 mode. This mode presents the board as a USB mass-storage device, to which you can upload a pre-compiled .uf2 firmware file to recover an...