[HTG] Initial Setup
New to MeshCore? Start here! This section has the basics, such as how to flash your nodes.
[HTG] DFU Recovery Bootloader (nRF52840 Only)
Summary In the event of a failed firmware flash or failed boot post-flash, nRF52840-based device...
[HTG] Ripple Firmware Device Setup
Setting up your device after flashing the Ripple GUI firmware (e.g. Lilygo T-Deck).
[HTG] Flashing Firmware
To flash MeshCore onto your node, follow the steps below. Web Flasher You will need to use a comp...