Recently Updated Pages

Description This build is typically used for "Core" type repeaters (see [ENT] Node Names for a br...

To flash MeshCore onto your node, follow the steps below. Web Flasher You will need to use a comp...

External Links Below are links to various other related websites that may be helpful. MeshcoreAus...

CLI Console All commands below are directly parsed by the firmware, available over USB‑CDC, seria...

Radio Settings Region Frequency Bandwidth Spread Factor Coding Rate Australian Capital Ter...

Overview Companions are nodes flashed with either BLE or USB companion firmware, and are used to...

Summary In the event of a failed firmware flash or failed boot post-flash, nRF52840-based device...

Overview Looking to get started but not sure what device to use? Here is a simplified list to he...

What is MeshCore? MeshCore is a decentralised text-based communications platform. It is designed...

Below are download links for map tiles that can be copied to the SD card on standalone MeshCore d...

Accessories Item Description Link Mounting Magnets https://a.aliexpress.com/...

Development Boards Feature Heltec v4 (Low Power) Heltec v4 (High Power) LilyGO T3-S3 SX...

 Meshcore Node Naming Guide This guide outlines the standardised naming convention for MeshCore ...

Warning: The below has not yet been fully fact-checked and should be considered a work-in-progres...