Skip to main content

Node Names [DRAFT]

 Meshcore Node Naming Guide

This guide outlines the standardised naming convention for MeshCore infrastructure nodes (Room Servers and Repeaters only). It ensures consistency, readability, and compatibility within a 32-23-character limit.

Naming Format

Repeaters

Naming Layout

[SSS3]-[LOC10] LOC12]-[TYPE3]-[SUBTYPE3]-[ID2]

Segment Definitions

Field Length Description
SSS3 3 State/Province/Territory, uppercase (e.g. VIC, NSW)
LOC10LOC12 1012 Up to 1012 letterscharacters of locality (e.g. MELTON, GEELONG, CHELTENHAM)
TYPE3 3

Node type

RMS = Room server (Repeat disabled)

RMP = Room server (Repeat enabled)

RPT = Repeater

SUBTYPE3 3

Repeaters


  1. COR = Core: Long backbone links to join smaller distribution areas together with less hops. High elevation mountain-top/tower mounted nodes in remote locations. Independently powered (i.e. not grid-tied) with battery backup. May use directional or omnidirectional antennas. Companion nodes typically would not connect directly to a core node.
  2. DIS = Distribution: Mid to long range links with reliable connectivity to at least one core node and ideally multiple other distribution nodes to provide path redundancy. Typically at a high elevation point within a suburban area and used to join edge repeaters to the wider mesh. Independently powered (i.e. not grid-tied) with battery backup. Should only use omnidirectional antennas. Not to be used for rooftop/residential nodes.
  3. EDG = Edge: Rooftop and residential nodes. Any elevation OK. Reliability not a strict requirement. Mains power acceptable.
  4. MOB = Mobile: Vehicle-mounted, on-person carried, and temporary nodes. Wild west; anything goes.

Room Servers

    PRV = Private: Access restricted to a select group of individuals. PUB = Public: Open to anyone. ID2 2 2 digit number (01-99) identifying the node. DESC6 ≤6 Less than 6 characters optional free-text (for all node types), human-readable description. e.g. to identify node maintainer or special purpose. Can be more than 6 characters if location is less than 10 characters.

    Room Servers

    Naming Layout

    [SSS3] [TYPE3]-[SUBTYPE3] [DESC21]

    Segment Definitions

    Field Length Description SSS3 3 State/Province/Territory, uppercase (e.g. VIC, NSW) TYPE3 3

    Node type

    RMS = Room server (Repeat disabled)

    RMP = Room server (Repeat enabled)

    SUBTYPE3 3

    Room Servers

      PRV = Private: Access restricted to a select group of individuals. PUB = Public: Open to anyone. DESC21 ≤21 Less than 21 characters optional free-text, human-readable description. e.g. to identify node location, purpose, owner.

      Rules

      • All segments are separated by single spaces or hyphen (review the Naming Format heading at the top of this page).

      • Total name must not exceed 3223 characters.

      Description field is optional, but encouraged to help identify node purpose or owner.characters.

      Examples

      Room Servers

      Purpose Node Name Room Server (non-repeating) node for public use VIC RMS-PUB MeshCore Fan Club Room Server (Repeating) node for private use VIC RMP-PRV Lewd ASCII Art

      Repeaters


      Purpose Node Name
      Core Repeater in Hobart TAS-HOBART RPT-HOBART-COR-01
      Distribution Repeater in Dandenong VIC-DANDENONG RPT-DANDENONG-DIS-01
      Edge Repeater in Geelong on Phil's house VIC-GEELONG RPT-GEELONG-EDG-01 Phil

      Back to top